Cutting Tools for Mechanical processing.
    Or why shall I buy a more expensive one

    5 main reasons:
    I would like to spend few words with you in the purchase department. Very often people working on the purchase department do not consider the tools their production is using. They just place the order considering the price and the delivery time. I know it difficult to change the usual supplier and to test a new ones. Is it really so difficult?

    Fresa per casse contatori in ottone a disegno saldobrasata, l’affilatura del profilo tagliente viene eseguito esclusivamente con mola diamantata.

    Fresa per casse contatori in ottone a disegno saldobrasata, l’affilatura del profilo tagliente viene eseguito esclusivamente con mola diamantata.

    1- Never mind, Keep focus on your production, how many pieces are you producing with one single tool before you need to have it reshaped or replaced?
    It is not a stupid question trust me as in fact by comparing on the prices you lose in efficiency and quality, not only the quality of the tool but in the quality of your production. The lower quality of material causes a quick worn of the cutting tool.
    Another important question to be considered

    Frese a T a disegno, saldobrasate, in HSS o in metallo duro integrale, possibilità di costruzione con vari attacchi, possibilità di rivestimento a seconda del materiale da lavorare.

    Frese a T a disegno, saldobrasate, in HSS o in metallo duro integrale, possibilità di costruzione con vari attacchi, possibilità di rivestimento a seconda del materiale da lavorare.

    2- machines and productions stops, very often cheaper tools are not within the tolerances required by you technical department and I perfectly know that this is a main cause for machine stops and
    3- what about your production time? even when the machine doesn’t stop the production has to find solutions to adjust the differences created by the lack of accuracy and this time loss costs you money.

    4- the tool life is longer as the tool is stronger and can be reshaped more times without losing in efficiency

    Fresa speciale a disegno saldobrasata, con attacco ISO 50, per lavorazione di valvole.

    Fresa speciale a disegno saldobrasata, con attacco ISO 50, per lavorazione di valvole.

    5- finally by braze welded tools we can renew it by replacing the HM cutting profile this a further plus point.
    The company UMR Utensili has been on the market for 45 years increasing its experience and collaborating with the customer in order to reach a good balance between: accuracy, costs, quality, delivery time.
    UMR utensili produces only on customer drawing and the internal technical department support the customer in finding the right solution. In case of interest www.umrutensili.it
    See you soon with further information sincerely yours UMR Utensili

    Follow us
    on Linkledin  https://www.linkedin.com/company/umr-utensili?trk=biz-companies-cym
    Or on facebook https://www.facebook.com/UMRutensili